Wheel Alignment Machine

Product Details:

Characteristics of 3D Wheel Alignment:-

• 3D cameras (imported) alignment
• Based on the car and not influenced by the platform
• Measurement system equipped with double digital cameras and four target disk, Supplying revolutionary measurement mode
• Target disk There is no electronic components, so the wheel alignment will not has a Component failure problem.
• Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
• Measurement progress no need to compensate for steel ring,
• The precise eccentric compensation will be just once pulling or pushing the car back and forth
• Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners.
• Daily Maintenance Easily maintenance, download and upgrade.

Technical Features:-

Measurement Project	Accuracy	Measurement Range
Camber	±2´	±10°
Caster	±6´	±20°
Kingpin Inclination	±6´	±20°
Toe-in & Toe-out	±2´	±20°
Set back	±2´	±5°

Product Details:

Characteristics of 3D Wheel Alignment:-

• 3D cameras (imported) alignment
• Based on the car and not influenced by the platform
• Measurement system equipped with double digital cameras and four target disk, Supplying revolutionary measurement mode
• Target disk There is no electronic components, so the wheel alignment will not has a Component failure problem.
• Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
• Measurement progress no need to compensate for steel ring,
• The precise eccentric compensation will be just once pulling or pushing the car back and forth
• Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners.
• Daily Maintenance Easily maintenance, download and upgrade.

Technical Features:-

Measurement Project	Accuracy	Measurement Range
Camber	±2´	±10°
Caster	±6´	±20°
Kingpin Inclination	±6´	±20°
Toe-in & Toe-out	±2´	±20°
Set back	±2´	±5°

Product Details:

Characteristics of 3D Wheel Alignment:-

• 3D cameras (imported) alignment
• Based on the car and not influenced by the platform
• Measurement system equipped with double digital cameras and four target disk, Supplying revolutionary measurement mode
• Target disk There is no electronic components, so the wheel alignment will not has a Component failure problem.
• Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
• Measurement progress no need to compensate for steel ring,
• The precise eccentric compensation will be just once pulling or pushing the car back and forth
• Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners.
• Daily Maintenance Easily maintenance, download and upgrade.

Technical Features:-

Measurement Project	Accuracy	Measurement Range
Camber	±2´	±10°
Caster	±6´	±20°
Kingpin Inclination	±6´	±20°
Toe-in & Toe-out	±2´	±20°
Set back	±2´	±5°

Product Details:

Two front measuring heads equipped with 4 infra red CCD sensors and two rear infra red transmitters, make it possible to carry out a quick and precise measurement of all steering angles on the front axle, or with two operations on front and rear axles to measure all related angles. By repeating this operation, thanks to the long reading distance of the measuring heads, it is also possible to measure the angles on vehicles with three or more axles or steering axles.

Product Details:

Parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out.

• 3D cameras (imported) alignment
• Based on the car and not influenced by the platform
• Measurement system equipped with double digital cameras and four target disk, Supplying revolutionary measurement mode
• Target disk There is no electronic components, so the wheel alignment will not has a Component failure problem.
• Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
• Measurement progress no need to compensate for steel ring,
• The precise eccentric compensation will be just once pulling or pushing the car back and forth
• Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners.
• Daily Maintenance Easily maintenance, download and upgrade.

Technical Features:-

Measurement Project	Accuracy	Measurement Range
Camber	±2´	±10°
Caster	±6´	±20°
Kingpin Inclination	±6´	±20°
Toe-in & Toe-out	±2´	±20°
Set back	±2´	±5°

Product Details:

The total drive wheel aligner, thanks to its innovative design concept and use of state-of the art technologies and components represents the very best choice in terms of price/performance ratio. All the characteristic angle of both vehicle axles are controlled by means of four measuring heads with 8 CCD sensors and infrared transmission (6 CCD sensors on TD 5060 and 4 on TD 5040).

• The wheeled control unit houses the data processing and management computer, the printer (color ink jet A4 format) and the high-resolution monitor.
• Special supports on the side of the control unit permit housing and recharging of the measuring-heads battery when these are not used.
• Big wheels for easy movement inside the workshop.
• The keyboard with remote control function provides total “on vehicle” operation so the control unit only needs to be used at the start and end of test.
• Data management and display program in window environment.
• Customer data bank for recording 20000 jobs with search by customer name or vehicle plate number.

Product Details:

Feature:

• Two Head Or Four Head sensors Measurement, accurate and stable.
• High precision inclinometer with temperature compensation.
• Voice prompt function and 3D animation.very easy to understand.
• Camber, toe-in,battery electricity quantity, charging status and electronic level ect.can be rel-time displayed by LCD.
• Alignement function can be remotely controlled from easch sensor heads.
• Large capacity lithium battery with low power consumption and dormancy mode of design.
• Black box self-diagnostic function for the sensor heads.
• Maximum 25 Inches high procision wheel clamp.
• Wireless data transfer with 2.4Ghz zigbee or bluetooth technology.
• Complete vehicle Specification with more than 20.000 models online data download and dunction add are support.